15 TUANSGATE, TALLAGHT DUBLIN 24, DUBLIN

Alterations to previously approved design (Reg.Ref:SD25A/0001W) comprising modified internal apartment layouts, additional window/door ope to terraces in Apts 1 & 2, fenestration alternations to southern and eastern facades, additional floor area to Apt. 4 to northern elevation, additional of 2 no. AOV's to roof level and all associated site works.

Retention Planning Permission for the following: single storey extension (Area 122m2 / c. 6.5m in height) to North elevation of existing industrial building, the installation of a fire escape door to East elevation (rear), alterations to the West (front) elevation, as previously approved under planning reference SD08A/0719 and associated site works at Units A1/A2 South City Business Park, Tallaght, D24HT95.

The provision of External Wall Insulation (EWI) to the existing brick-finished elevations of the dwelling. The works involve the application of an EPS insulation board system finished with a high-quality breathable acrylic render to match the existing rendered sections of the estate. The development is intended to improve the thermal performance of the building envelope as part of a deep retrofit. All works are to be contained within the existing curtilage of the site.

The installation of 6 no. 6m high floodlights around the existing pitch and associated site works and the retention of the existing pitch boundary treatment comprising 2.4m high painted metal mesh fence with access gates with 3m high netting above.

Permission to add exterior signage to the building enhancing the visibility of the location to the general public and any perspective customers. The signage will be non-illuminate and the size will be 3,000mm width by 1129mm height. The signage will be 20mm PVC letters bonded to the building surface using Tech 7 bonding and double sided adhesive. The management team in WorkIQ will be responsible for the upkeep and ,maintenance of the sign. The proposed increase in letter height from the prescribed 400 mm maximum to 1129mm is necessary to ensure appropriate visibility and proportionality relative to the scale of the WorkIQ Innovation Quarter building. Given the building's substantial façade and its setback position from Belgard Square North, smaller lettering would not achieve adequate legibility from the adjacent roadway or pedestrian approaches. The larger 1129mm letters are designed to maintain visual balance with the building's architectural proportions while providing clear identification for visitors and clients approaching from distance. As WorkIQ functions as a landmark innovation and enterprise hub accommodating multiple businesses, its signage must perform a wayfinding role that reflects its civic and commercial significance within the Tallaght Innovation Quarter.

For the conversion of existing garage structure, new porch extension to the front elevation, new first floor extension over garage, new canopy roof alongside passage, new wall on party line on front elevation, new single storey Granny Flat Structure with new link to original house and all associated works. The Granny Flat space will consist of kitchen/living area, WC and bedroom.

Permission for change of use and subdivision of existing flower shop to coffee shop/barber shop and associated site works.

Construction of an extension to the existing industrial building on the side (west) Elevation and the rear (north) Elevation for additional secure storage.

The proposed development will consist of amalgamation (including removal of internal mezzanine areas) and change of use of Units U133ABC (former An Post) and U133D (former Bodytalk) from Post Office and Retail Use respectively (both Class 1 “shops”) to accommodate a restaurant/ takeaway unit (243sqm) for consumption of hot food on and off the premises, modifications to existing shopfront signage, new tenant sign on eastern elevation and all associated site and development works

WorkIQ seek permission to add exterior signage to the building enhancing the visibility of the location to the general public and any perspective customers. The signage will be non-illuminate and the size will be 3,000mm width by 1129mm height. The signage will be 20mm PVC letters bonded to the building surface using Tech 7 bonding and double sided adhesive. The management team in WorkIQ will be responsible for the upkeep and ,maintenance of the sign. The proposed increase in letter height from the prescribed 400 mm maximum to 1129mm is necessary to ensure appropriate visibility and proportionality relative to the scale of the WorkIQ Innovation Quarter building. Given the building's substantial façade and its setback position from Belgard Square North, smaller lettering would not achieve adequate legibility from the adjacent roadway or pedestrian approaches. The larger 1129mm letters are designed to maintain visual balance with the building's architectural proportions while providing clear identification for visitors and clients approaching from distance. As WorkIQ functions as a landmark innovation and enterprise hub accommodating multiple businesses, its signage must perform a wayfinding role that reflects its civic and commercial significance within the Tallaght Innovation Quarter.